TAC System - Hydrophobic Top Coat 2.0

TAC System - Hydrophobic Top Coat 2.0Super Hydrophobic Top Coat (Kit 50ml)Numai pentru Uz Profesional !Produs de Curăţare si Intreţinere Auto!_x000D_ _x000D_ Acesta este un Produs Chimic!_x000D_ Este destinat numai pentru Uz Profesional!Nu lăsaţi la indemana copiilor!Acest produs poate irita ochii si pielea!Intotdeauna purtaţi mănusi de protecţie!Net Content: 50mlCommon Uses: Stand alone LSP for painted surfaces, or as a topper to TacSystem coatings after full curing; all exterior vehicle surfaces, including paint, plastic, and glassIncluded:_x000D_ 1x TOP COAT 2.0 50ml_x000D_ 5x Suede 10cm x 10cm_x000D_ 1x Suede 30cm x 30cm_x000D_ 1x Coating Block_x000D_ Durability/Product Specs: 1year.Top Coat 2.0 is a durable, glossy, and hydrophobic inorganic coating layer designed to protect all exterior vehicle surfaces, including paint, plastic, and glass. While Top Coat 2.0 was engineered as a top layer (topper) to an existing coating, it works impressively well as a stand-alone coating offering a year of superior gloss, shine, and hydrophobic properties to paint, allowing for ease of vehicle maintenance. It contains Silica, Hydrocarbon, Titanium, Zirconium and Fluorine under advanced nanotechnology._x000D_ TAC Top Coat 2.0 is the most advanced surface care enhancement product come from Korea. In fact, it is much different. This Coating provides the best protection on multiple surfaces, including paint, plastic, glass, and wheels. This TAC Top Coat 2.0 will be well protected your car against the harmful effects of nature._x000D_ Warnings: _x000D_ Always wear respirator & gloves. Ensure application area is free of loose contamination._x000D_ (In a well lit, temperature controlled below 25°C, & contamination free environment)_x000D_ (Suggested section size: 1 panel at a time) Applicator Limit - Hood Size, spread evenly over the section, allow dwell time within 30 seconds, then wipe off with new micro fiber towel. Applicator Limit 1/2 Hood Size area - then change._x000D_ 1. Clean and dry all exterior vehicle surfaces thoroughly. Apply out of direct sun to cool vehicle panels._x000D_ 2. With a dedicated micro fiber suede ormicro fiber applicator pad, apply a small amount of Top Coat 2.0 to the applicator then begin to work it in, one panel at a time. It spreads out very well, a little goes a long ways._x000D_ 3. Once applied allow Top Coat 2.0 to dwell within 30 seconds, then using a clean, soft microfiber towel, buff the surface until all excess product is removed._x000D_ Tips / Alternate Uses:_x000D_ Can be used as a stand alone coating and also topped with Quartz Max._x000D_ Max Efficiency (not required):_x000D_ Cure Top Coat2.0 with IR lamps at 50°C-60°C for 30 minutes._x000D_ Post Application Instructions:_x000D_ Top Coat 2.0 requires 3-4 hours of cure time before water exposure. _x000D_ -Keep bottle tightly closed after used and store in cool dry space._x000D_ -Keep product out of reach from children._x000D_ -Wear suitable gloves. If comes into contact with skin, rinse well with water._x000D_ -If it comes in contact with eyes, rinse immediately and seek medical advice._x000D_ -Do not drink! If swallowed, consult a doctor immediately and show product container and label._x000D_ If you are interested in this item, please contact us by email._x000D_ Or if you have any questions or needs about our products, please contact us at any time._x000D_ We are also going to export this product all over the world._x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_